Resin-Bonded Filter Cartridge
RB (Resin-Bonded) Cartridge is produced from cellulose fibers, which have been intrinsically bonded together by a melamine resin to create a solid that is highly durable &has a porous structure. By treating the fibers in this fashion we can ensure a stronger cartridge that is less likely to collapse than a wound or pleated cartridge.
Unfiltered fluid passes through a depth filter matrix and enables the progressive retention of finer particles, which provides higher efficiency, better dirt retention & long filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of the cartridge.
- Free of surfactants, binders and adhesives.
- Excellent flow with low pressure drop.
- High dirt holding capacity.
- Temperature limit 4.4 Deg C to 93.3 Deg C.
- Longer service life.
|» Standard Sizes||10”, 20”,30”40”|
|» Micron Rating||1, 5, 10, 25|
|» Outside Diameter||64mm|
|» Inner Diameter||28 mm|
|» Food & Beverages||Bottled water, Flavors, Polishing Lines|
|» Pharmaceuticals||Base product clarifications, Membrane prefilter|
|» Fine Chemicals||Solvents, Process Streams, Water Purification|
|» Petrochemicals||Water flood, Completion Fluids, Amines|
|» Cosmetics||Alcohols, Essential oils, Water lines|
|» Water Treatment||Membrane Protection, Resin Trap|
|» Metal Finishing||Plating solution, paints and resins, products Wash|
|» Edible Oil|
|» Mineral Oil|
|» Paints & Inks|
|» Photographic solutions|
|FCI||RBCM||Diameter of cartridge||Micron Rating||Length Of Cartridge|
|Resin Bonded Cellulose Melamine||68 MM||001 Micron||10″ Length|
|005 Micron||20″ Length|
|010 Micron||30″ Length|
|025 Micron||40″ Length|